The 597 Leopard stock
The Rhineland Arms Leopard stock is back in production with some new changes to allow for higher production levels.
This stock is made of solid American walnut or Mahogany with a straight grain pattern to the wood. Features include a adjustable check rest and butt pad. The cheek rest is made of a medium hard rubber as is the butt-pad. The barrel is free floated and you can use barrel size up to 1" including a suppressor. Multiple hard points on the sides, bottom and front allow for mounting accessories. Lock knobs are military pattern.
This stock will not work with the stock iron sites as the check rest is too high. You do need a scope with medium high rings.
The check rest is adjusted using locking knobs located on the sides and the recoil pad is now adjusted with flushed mounted nuts on both sides for a rigid lockup. The butt pad will give a length of pull of 13.5-15". The check rest has a adjustability of 1".
NOTICE---We make these stocks with a very tight fit to the receiver. You may have to open the inside of the stock up a bit, and maybe the mag well area also.
To order please use the paypal secure ordering system below. . Contact us by email at info@troupsystems.com
Sales Pricing, available until Jan 4th 2012.
 |
Leopard stocks getting ready for shipping.
Spring 2011 |
Made in the USA